.TITLE  PPPDMSG
	.IDENT  "X-14"
!*
!*++
!*
!*  Copyright © 1996 Digital Equipment Corporation.
!*  All rights reserved.
!*
!*  Redistribution and use in source and binary forms are permitted
!*  provided that the above copyright notice and this paragraph are
!*  duplicated in all such forms and that any documentation,
!*  advertising materials, and other materials related to such
!*  distribution and use acknowledge that the software was developed
!*  by Digital Equipment Corporation.  The name of the
!*  Corporation may not be used to endorse or promote products derived
!*  from this software without specific prior written permission.
!*  THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
!*  IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
!*  WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
!*
!*  FACILITY:
!*      PPPD
!*
!*  MODULE:
!*      PPPDMSG.MSG
!*
!*  ABSTRACT:
!*      This file contains messages for the PPP interface.
!*
!*      Note: messages in this file should be 131 characters or less.
!*
!*  ENVIRONMENT:
!*      Transportable.
!*
!*  AUTHOR:
!*      Iris Langstein Realmuto, December, 1995
!*
!*  MODIFICATION HISTORY:
!*
!*	X-14	JPT002		Joe P.Tavares		24-MAR-1997
!*		Add error message for when sys$dassgn fails
!*
!*      X-13    JPT001          Joe P.Tavares           19-MAR-1997
!*              Add error message for case where the proper Modem
!*              signals are not lit.
!*
!*      X-12    BWK012          Barry W. Kierstein      17-DEC-1996
!*              Replaced the standard Digital copyright with
!*              one compatible with the CMU copyright.
!*
!*      X-11    BWK011          Barry W. Kierstein      24-SEP-1996
!*              Added error messages in conjunction with the kernel
!*              and dialout error reporting standardization, and
!*              QARS EVMS-GRYPHON #2454 and #2474 (PPPDUTIL.C).
!*
!*      X-10    BWK010          Barry W. Kierstein      30-AUG-1996
!*              Edited message text of various messages by request of
!*              the documentation writers.  Took out INUSE message
!*              as it was a duplicate of PREVSET message.
!*
!*      X-9     BWK009          Barry W. Kierstein      21-AUG-1996
!*              QAR EVMS-GRYPHON-FT #116:
!*                  DIAL_OUT hangs with line set to /MODEM.
!*                  Added error messages in fixing the dialout code.
!*
!*              Added text messages for SHOW/ALL={BRIEF,LONG}.
!*
!*      X-8     BWK008          Barry W. Kierstein      12-AUG-1996
!*              Added text messages for SHOW/ALL={BRIEF,LONG}.
!*
!*      X-7     BWK007          Barry W. Kierstein      07-Aug-1996
!*              QAR EVMS-GRYPHON 100:  Renamed PERMTERMUNSUPP to
!*              TERMUNSUPP, and TRANTERMUNSUPP to NEEDVIRTTERM
!*              to reflect the new function of these error messages.
!*              Modified NEEDVIRTTERM to include the device name in
!*              the error message.
!*
!*      X-6     BWK006          Barry W. Kierstein      07-Aug-1996
!*              QAR EVMS-GRYPHON 99:  Took out error text PORTSETUP2, as it is
!*              no longer needed.
!*              Added CONNECTTERM message to signal the user that a PPP
!*              connection is being attempted.
!*
!*      X-5     BWK005          Barry W. Kierstein      01-AUG-1996
!*              Insert/modify SHOW messages to allow for showing data
!*              on inactive lines and newly inited device templates.
!*              Put all SHOW option text into messages (TEXT_*).
!*              Added function messages to put the reporting of
!*              a status in context.
!*
!*      X-4     BWK004          Barry W. Kierstein      11-JUL-1996
!*              Finished DIAL_OUT and HELP commands, fixed numerous bugs.
!*              Put in offsets for each type of message so that
!*              messages can be inserted without affecting other sections.
!*
!*      X-3     BWK003          Barry W. Kierstein      14-JUN-1996
!*              Finished the SET and SHOW sections, fixed numerous bugs.
!*
!*      X-2     BWK002          Barry W. Kierstein      14-MAY-1996
!*              Implemented initial SHOW command and fixed numerous bugs.
!*
!*      X-1     BWK001          Barry W. Kierstein      12-APR-1996
!*              Initial check in of this module.
!*

	.FACILITY PPPD,1855/SYSTEM

	.SEVERITY FATAL
ABORT           <fatal error encountered; operation terminated>/FAO_COUNT=0


	.SEVERITY ERROR
!
! User errors
!
	.BASE     20

FORMAT          <device name is not specified in the format ddcu>/FAO_COUNT=0
INVRANGE        <value specified for /!AS (!AS) is not within the valid range of !UL and !UL>/FAO_COUNT=4
LOGNAME         <logical name exceeds maximum length for device name>/FAO_COUNT=0
NOPARITY        <device must be set to no parity>/FAO_COUNT=0
NOPPP           <network protocol has not registered a PPPD callback routine>/FAO_COUNT=0
NOTNUMERIC      <value specified for /!AS (!AS) must be numeric>/FAO_COUNT=2
NOTREG          <network protocol has not been registered>/FAO_COUNT=0
REMOTE          <physical device specified cannot be a remote terminal>/FAO_COUNT=0
TERMINAL        <physical device specified must be a terminal device>/FAO_COUNT=0
NODISCPRIV      <no privilege to disconnect the specified device>/FAO_COUNT=0
PREVSET         <device has already been set up for point-to-point connections>/FAO_COUNT=0
NEEDVIRTTERM    <point-to-point connection on device !AS must be done on a virtual terminal>/FAO_COUNT=1
TERMUNSUPP      <point-to-point connections on !AS are not supported>/FAO_COUNT=1
NOTCONNECT      <device has not been set up for point-to-point connections>/FAO_COUNT=0
PPPNOTAVAIL     <point-to-point driver is not installed>/FAO_COUNT=0
NOCVTINPUT      <unable to open input file !AS>/FAO_COUNT=1
NOCVTOUTPUT     <unable to open output file !AS>/FAO_COUNT=1
INVVALUE        <value specified for /!AS (!AS) is not valid>/FAO_COUNT=2
ILLEGALACCM     <illegal transmit ACCM bits are specified in value !UL>/FAO_COUNT=1
DATAOVERUN      <data overrun on device !AS>/FAO_COUNT=1
MODEMHANGUP     <modem has signaled a hangup on the line; session ended>/FAO_COUNT=0
INVPERMFLOW     <cannot open a permanent point-to-point connection on a serial port set to MODEM or COMMSYNC>/FAO_COUNT=0
INVFLOWCTRL     <cannot set hardware flow control on a serial port set to both NOMODEM and NOCOMMSYNC>/FAO_COUNT=0
INVPERMCONN     <cannot establish a permanent point-to-point connection with an incoming login session>/FAO_COUNT=0
MODEMNOREMOTE   <cannot establish a modem connection; cannot detect modem signals>

!
! Internal errors (shouldn't happen)
!
	.BASE 100

INVASNCODE      <invalid ASN item code of !UL>/FAO_COUNT=1
INVPPPCODE      <invalid PPPD item code of !UL>/FAO_COUNT=1
INVDIALSTS      <invalid DIALOUT_MAIN routine return status of !UL>/FAO_COUNT=1
BADIOSBADDR     <IOSB buffer address !8XL is not on allocated list>/FAO_COUNT=1
IOSBALLOC       <allocated IOSB list is not empty>/FAO_COUNT=0
PPPLISTOVER     <PPP itemlist overrun; tag, items size, items item_length and len = !UL !UL !UL !UL>/FAO_COUNT=4
INVHANGASTP1    <unexpected condition in hangup AST, P1 is default>/FAO_COUNT=0
INVHANGASTINIT  <invalid P1 passed in, P1 and io_port_block = !XL !XL>/FAO_COUNT=2
DEASSIGNCHAN	<error deassigning channel>
!
! Context error messages
!
	.BASE 130

DIALINIT        <error in DIAL_OUT initialization>/FAO_COUNT=0
PROGINIT        <error in initialization>/FAO_COUNT=0
ASSIGNCHAN      <error trying to open device !AS>/FAO_COUNT=1
ASNSETUP        <error with ASN device setup>/FAO_COUNT=0
PORTSETUP       <error with !AS device setup>/FAO_COUNT=1
TERMSETUP       <error with terminal setup>/FAO_COUNT=0
TIMERSETUP      <error setting up wait>/FAO_COUNT=0
TRACESETUP      <error with trace setup>/FAO_COUNT=0
PORTDISC        <error disconnecting !AS>/FAO_COUNT=1
NOASNACCESS     <error accessing ASN device>/FAO_COUNT=0
NOPPPACCESS     <error accessing PPP device>/FAO_COUNT=0
NOPORTACCESS    <error accessing !AS>/FAO_COUNT=1
EDITDEVICE      <error editing device name !AS>/FAO_COUNT=1
CMDPROC         <error processing command>/FAO_COUNT=0
PROTOERR        <error initiating network protocol callback routine>/FAO_COUNT=0
OUTPUTERR       <error creating output line>/FAO_COUNT=0
BREAKERR        <error sending break on !AS>/FAO_COUNT=1
READERR         <error reading from !AS>/FAO_COUNT=1
WRITEERR        <error writing to !AS>/FAO_COUNT=1
PPPCREATEERR    <error creating link between PPP device and serial device>/FAO_COUNT=0
PPPCONNECTERR   <error connecting to PPP device>/FAO_COUNT=0
PPPINFOERR      <error obtaining information from PPP device>/FAO_COUNT=0
PPPSETERR       <error setting PPP device>/FAO_COUNT=0
PPPENABLEERR    <error starting PPP connection>/FAO_COUNT=0
CALLBACKERR     <error calling network callback>/FAO_COUNT=0

	.SEVERITY WARNING
!
! Real warning messages
!
	.BASE 200

ASNCNTINV       <unable to show counters on an inactive line>/FAO_COUNT=0

!
! Debugging warning messages
!
	.BASE 300

BADSTATUS1      <Bad status returned in !AZ of !8XL>/FAO_COUNT=2
BADSTATUS2      <Bad status returned in !AZ of !8XL, P1 = !8XL>/FAO_COUNT=3
BADSTATUS3      <Bad status returned in !AZ of !8XL, P1 = !8XL, P2 = !8XL>/FAO_COUNT=4

	.SEVERITY INFORMATIONAL
!
! Real informational messages
!
	.BASE 500

TRACEDEFFILE    <no trace file name was specified; using !AS>/FAO_COUNT=1
CONNECTTERM     <converting connection on device !AS to a Point-to-Point connection>/FAO_COUNT=1

!
! Prompts or output control strings
!
	.BASE 600

!     Miscellaneous output

CMDPROMPT       "PPPD> "
SPECIALCHARS    "!/Type control-!AZ to send a break,!/     control-!AZ to disconnect,!/ and control-!AZ to switch to a Point-to-point connection.!/"/FAO_COUNT=3

	.BASE 700

!     SHOW command output

SHOWLINEINIT    "!/Line !AS: has not been configured;!/  showing default settings!/"/FAO_COUNT=1
SHOWLINEINACT   "!/Line !AS: is not currently being used for PPP connections;!/  showing internal settings!/"/FAO_COUNT=1
SHOWLINEACT     "!/Line !AS: is being used for PPP connections;!/  showing current line settings!/"/FAO_COUNT=1
SHOWHDR01       "Qualifier settings for line !AS:!/"/FAO_COUNT=1
SHOWACCMP       "    Address compression:!_!18AS"/FAO_COUNT=1
SHOWCOMPORT     "    ASN port name:!_!_!18AZ"/FAO_COUNT=1
SHOWDBG         "    Debug trace:!_!_!18AS"/FAO_COUNT=1
SHOWDBGFILE     "    Debug trace filename:!_!18AS"/FAO_COUNT=1
SHOWDBGMBX      "    Debug mailbox:!_!_!18AZ"/FAO_COUNT=1
SHOWECHOFAIL    "    Echo failure:!_!_!8UL"/FAO_COUNT=1
SHOWECHOINT     "    Echo intervals:!_!_!8UL"/FAO_COUNT=1
SHOWFLOWCTRL    "    Flow control:!_!_!18AS"/FAO_COUNT=1
SHOWHANGUP      "    Hangup setting:!_!_!18AS"/FAO_COUNT=1
SHOWLINETYPE    "    Line type:!_!_!_!18AS"/FAO_COUNT=1
SHOWMAGIC       "    Magic retries:!_!_!8UL"/FAO_COUNT=1
SHOWMAXCONF     "    Maximum configure:!_!_!8UL"/FAO_COUNT=1
SHOWMAXFAIL     "    Maximum failure:!_!_!8UL"/FAO_COUNT=1
SHOWMAXTERM     "    Maximum terminate:!_!_!8UL"/FAO_COUNT=1
SHOWMRU         "    MRU:!_!_!_!8UL"/FAO_COUNT=1
SHOWMTU         "    MTU:!_!_!_!8UL"/FAO_COUNT=1
SHOWMODE        "    Mode:!_!_!_!18AS"/FAO_COUNT=1
SHOWNETPROT     "    Network protocol:!_!_!18AS"/FAO_COUNT=1
SHOWPROTOCOMP   "    Protocol compression:!_!18AS"/FAO_COUNT=1
SHOWFCSRX       "    Receive FCS:!_!_!8UL"/FAO_COUNT=1
SHOWFCSTX       "    Transmit FCS:!_!_!8UL"/FAO_COUNT=1
SHOWRTIMER      "    Restart timer:!_!_!8UL"/FAO_COUNT=1
SHOWINSPEED     "    Input speed:!_!_!8UL"/FAO_COUNT=1
SHOWINSPEEDDEF  "    Input speed:!_!_PORT DEFAULT"/FAO_COUNT=0
SHOWOUTSPEED    "    Output speed:!_!_!8UL"/FAO_COUNT=1
SHOWOUTSPEEDDEF "    Output speed:!_!_PORT DEFAULT"/FAO_COUNT=0
SHOWRECACCM     "!/    Receive ACCM (in hex):!_!8XL"/FAO_COUNT=1
SHOWTRANSACCM   "    Transmit ACCM (in hex):!_!8XL!/!_!_!_!_!8XL!/!_!_!_!_!8XL!/!_!_!_!_!8XL!/!_!_!_!_!8XL!/!_!_!_!_!8XL"/FAO_COUNT=6
SHOWHDR02       "!/Counter totals for line !AS:!/"/FAO_COUNT=1
SHOWBADFCS      "    Bad FCS packets:!_!16@UQ"/FAO_COUNT=1
SHOWDATALOST    "    Data lost (chars):!_!16@UQ"/FAO_COUNT=1
SHOWDROPCHAR    "    Dropped chars:!_!16@UQ"/FAO_COUNT=1
SHOWFRAMEERR    "    Framing errors:!_!16@UQ"/FAO_COUNT=1
SHOWLONGPKTS    "    Long packets:!_!16@UQ"/FAO_COUNT=1
SHOWRXPKTS      "    Packets received:!_!16@UQ"/FAO_COUNT=1
SHOWTXPKTS      "    Packets transmitted:!16@UQ"/FAO_COUNT=1
SHOWRUNTPKTS    "    Runt packets:!_!16@UQ"/FAO_COUNT=1
SHOWTOTCHARS    "    Total chars received:!15@UQ"/FAO_COUNT=1

! SHOW/ALL=BRIEF output

SHOWALL01A      "!/Line !AS: has not been configured; showing default settings!/"/FAO_COUNT=1
SHOWALL01B      "!/Line !AS: is not currently being used for PPP connections!/"/FAO_COUNT=1
SHOWALL01C      "!/Line !AS: is being used for PPP connections!/"/FAO_COUNT=1

SHOWALL02A      "Debug trace:     !8AS  Debug mailbox:  !AZ"/FAO_COUNT=2
SHOWALL02B      "Debug trace:     !8AS  Debug file:     !AS"/FAO_COUNT=2
SHOWALL03       "Address comp:    !8AS  Max configure:  !8SL  Restart timer:  !8SL"/FAO_COUNT=3
SHOWALL04       "ASN port name:   !8AZ  Max failure:    !8SL"/FAO_COUNT=2
SHOWALL05       "Echo failure:    !8SL  Max terminate:  !8SL  Receive ACCM:   !8XL"/FAO_COUNT=3
SHOWALL06       "Echo intervals:  !8SL  MRU:            !8SL  Transmit ACCM:  !8XL"/FAO_COUNT=3
SHOWALL07       "Flow control:    !8AS  MTU:            !8SL                  !8XL"/FAO_COUNT=3
SHOWALL08       "Hangup:          !8AS  Mode:           !8AS                  !8XL"/FAO_COUNT=3
SHOWALL09       "Line type:       !9AS Net protocol:   !14AS            !8XL"/FAO_COUNT=3
SHOWALL10       "Magic retries:   !8SL  Protocol comp:  !8AS                  !8XL"/FAO_COUNT=3
SHOWALL11A      "Input speed:     !8SL  Receive FCS:    !8SL                  !8XL"/FAO_COUNT=3
SHOWALL11B      "Input speed:     DEFAULT   Receive FCS:    !8SL                  !8XL"/FAO_COUNT=2
SHOWALL12A      "Output speed:    !8SL  Transmit FCS:   !8SL"/FAO_COUNT=2
SHOWALL12B      "Output speed:    DEFAULT   Transmit FCS:   !8SL"/FAO_COUNT=1

SHOWALL13       "Bad FCS packets:    !16@UQ   Packets received:   !16@UQ"/FAO_COUNT=2
SHOWALL14       "Data lost (chars):  !16@UQ   Packets transmitted:!16@UQ"/FAO_COUNT=2
SHOWALL15       "Dropped chars:      !16@UQ   Runt packets:       !16@UQ"/FAO_COUNT=2
SHOWALL16       "Framing errors:     !16@UQ   Total chars received:!15@UQ"/FAO_COUNT=2
SHOWALL17       "Long packets:       !16@UQ!/"/FAO_COUNT=1

        .BASE 800

!     Other SHOW based text

TEXT_ON         "ON"/FAO_COUNT=0
TEXT_OFF        "OFF"/FAO_COUNT=0
TEXT_HW         "RTS/CTS"/FAO_COUNT=0
TEXT_XON_XOFF   "XON/XOFF"/FAO_COUNT=0
TEXT_SET        "SET"/FAO_COUNT=0
TEXT_NOTSET     "NOT SET"/FAO_COUNT=0
TEXT_DEFAULT    "DEFAULT"/FAO_COUNT=0
TEXT_TRANSIENT  "TRANSIENT"/FAO_COUNT=0
TEXT_PERMANENT  "PERMANENT"/FAO_COUNT=0
TEXT_PASSIVE    "PASSIVE"/FAO_COUNT=0
TEXT_ACTIVE     "ACTIVE"/FAO_COUNT=0
TEXT_TRNERR     "Trn err"/FAO_COUNT=0

		.END